Care Of Laminate Tops, Tables, Furniture And Doors; Reading Lamp; Tv Inlet - Swift Motorhome Owners Service Manual

Care of laminate tops, tables,
furniture and doors
Do not use abrasives, chemically treated
cloths or aggressive detergents as these may
cause damage
Do not place hot objects on laminated
surfaces i.e. tops, tables. Any temperatures
70°C and over will cause permanent damage.
Clean worktop surfaces, furniture and door
fascias with a soft, slightly damp cloth, dry off
with a soft cloth.
12V Reading lamp
!
WARNING: 12v reading/spotlamps
generate high temperatures when in use, the
body, lens/bulb may become very hot.
Never make directional adjustment in
the direction of flammable materials i.e.
Curtains, nets or blinds.

TV inlet

Depending on specification, the motorhome
may be fitted with an external co-ax
connection in place of, or in addition to,
connections for a roof mounted TV aerial. The
external co-ax connection point will be within
the battery box (Escape models) or the mains
inlet enclosure (Sundance, E400, Borero and
E500 models).
Co-ax connection within battery box
Within the battery box a White cover flap
conceals a push-on type co-ax connection. A
co-ax cable is fitted and connected within the
motorhome from the back of this connection
to the TV position within the motorhome.
CARE OF LAM IN AT E TO P S , 12 V RE A DIN G
L AMP / TV IN LE T
An external TV aerial or site TV feed can be
connected to the external connection point;
signals from that connection will then be
available at the TV position co-ax socket within
the motorhome.
Co-ax connection point within the mains
inlet enclosure
A short co-ax lead featuring a screw on co-ax
connection will be present behind the Blue
mains inlet connector. A co-ax cable will be
fitted and connected within the motorhome,
from the back of this connection, to the
primary TV position within the motorhome. At
the same time, further co-ax cable or cables
will be fitted which route from a likely TV aerial
position (i.e. within the wardrobe) to each of
the TV positions within the motorhomes.
The primary TV position will feature a socket
marked 12v, TV, and SAT. The co-ax from
the external connection point will route to the
socket output marked SAT, whilst the co-ax
from the wardrobe or similar will route to the
socket output marked TV. At any secondary
TV positions, if present, the co-ax from the
wardrobe will route to the socket output
marked TV.
An external TV aerial or site TV feed can be
connected to the external connection point;
signals from that connection will then be
available at the primary TV position within the
motorhome. As the connections are of the
screw-on type, it is also possible to use this
co-ax to route from an externally mounted
satellite dish, to a satellite receiver.
187