Roof Lights; Blind And Flyscreen - Swift Motorhome Owners Service Manual

R O O F LIGHTS / FLYS CREEN
Malfunctions must be repaired by an approved
dealer at once. Do not use caustic detergents
(danger of tension cracks in the dome).
Before setting off close the dome and check
the locking mechanism.
Avoid high speed (maximum speed
recommended is 130 km/h). Do not close the
blind more than 2/3 during the day (danger of
heat build up). Before starting off, open
the blind.
Care instructions
Clean the dome with the Seitz acrylic cleaner.
Opaque spots and light scratches on the
dome can be removed with the Seitz Acrylic
Polish and the Seitz Special Polishing cloth.
Use talcum powder regulary (4 times yearly) to
care for the rubber seals.
Clean the blinds only with water and mild soap
suds or a vacuum cleaner.
Note: The guarantee becomes null and void
if the care and safety instructions are
not followed.

Roof lights

When opening the roof lights, care must be
taken to release the locking mechanism as the
unit is raised.
Roof lights must be fully closed when
driving. Roof lights provide essential fixed
levels of ventilation.
180
Mini Heki Rooflight
To open depress button and push bar
upwards. The rooflight has two open
ventilation positions and a fully open position.
The blind and flynet operate independently of
each other and are engaged by connecting to
each other and sliding.
Heki care instructions
Clean the blind only with a damp sponge.
Clean on a regular basis to avoid dust/ dirt
particle build up as this can damage the blind
material. Use only water or with mild suds or a
vacuum cleaner.
In order to avoid material fatigue, do not leave
the flynet closed for a long time.
Roof light blind and flyscreen
The blind and flyscreen operate Independently
of each other and are engaged by connecting
to each other and sliding.
Safety precautions:
1. Repairs should be carried out only by
trained personnel.
2. Inform an approved dealer in case of
defects and malfunctions.
3. Before starting off, check the rooflight for
damage in the acrylic dome (tension cracks)
and the winding mechanism which could
arise owing to, for example, branches and
other natural causes.
4. Do not step in the acrylic dome.
5. Close the roof light before starting off
(check whether it is locked).