Preparing For Use - Swift Motorhome Owners Service Manual

T HET FO RD CAS SETTE TOI L ET
q. Rotating emptying spout: ensures that the
waste tank can be easily and hygienically
emptied.
r. Access hatch to waste tank: lockable from
the outside of the vehicle.
Introduction
The Thetford cassette toilet is a high quality
product. The functional design combines
modern styling and ease of use and the toilet
forms an integrated part of your motorhome
bathroom. The Cassette toilet is manufactured
from high quality synthetic material This makes
it a durable, user and maintenance friendly
toilet.
The toilet is made up of two parts, a
permanently fixed part and a waste tank that
is accessible from the outside. The removable
waste tank is located, under the toilet bowl
and can be removed via a door on the outside
of the motorhome.

Preparing for use

C-402C, C-402X and C-403L
1. Open the access door on the outside of
your motorhome.
C-402C and C-402X
2. Rotate the waste tank emptying spout
90 degrees and remove the water filling
extension (you will find it positioned beneath
the handle closest to the emptying spout).
3. Rotate the waterfill funnel outwards, remove
the cap and place the extension on the
waterfill funnel. Add the stated amount of
Thetford fresh water additive to the water
tank. This ensures a better and cleaner flush
and keeps the water in the flush tank fresh.
4. Fill the water tank with clean water. Warning:
keep water level below the top of the water
filling funnel.
5. Remove the extension and return to its
original position on the waste tank.
170
Note: depending on the space between the
door and wate tank, this extension part may
also be fixed on the door with a hook. Screw
the cap back onto the water filling funnel
and push back inwards towards the side of
the flush water tank.
Note: 150ml of water will remain in the
waterfill funnel when the water tank is empty.
C-402C, C-402X and C-403L
6. Remove the waste tank by pulling the safety
catch upwards.
7. Pull the waste tank outward to the stop. Tip
it slightly and take the tank fully out.
8. Place the tank upright and turn the
emptying spout upwards.
9. Remove the cap, with the measuring cup
inside, from the emptying spout and pour
the stated quantity of toilet fluid into the
waste tank. This avoids unpleasant smells in
the waste tank and keeps the inside of the
waste tank clean. Next add approximately
2 litres of water - enough to ensure that
the bottom of the waste tank is covered.
Screw the cap back onto the emptying
spout. Turn the emptying spout back to its
original position. N.B. The emptying spout
measuring cap is supplied in the same
packaging as this manual.
!
WARNING: Never add toilet fluid via the
valve blade or via the toilet bowl.
10. Slide the waste tank back into its original
position via the access door.
!
WARNING: Never use force if you
cannot get the tank back into place easily.
This may cause serious damage.
11. Made sure that the wate tank is secured
with the safety catch. Shut the access
door and lock it.