Swift Motorhome Owners Service Manual page 155

T R OU BLES HO OTIN G
Operation with on-board
12 v power supply
Indicator
(2) and (8)
flashing and acous-
tic signal 20s
(4) and (8)
flashing and acous-
tic signal 20s
(3) and (8)
flashing and acous-
tic signal 20s
Acoustic signal,
15s at two minute
intervals
(2) and (7)
flashing and acous-
tic signal 20s
(4) and (7)
flashing and acous-
tic signal 20s
(7)
flashing and acous-
tic signal 20s
(3) and (7)
flashing and acous-
tic signal 20s
154
Fault Remedy
230 V mode: Check mains power connection, mains voltage,
"230V" not avail- fuse
able or voltage too
low
12 V mode: Check 12V connection, on-board battery, fuse
"12V" not available
or voltage too low
Gas mode: Check gas supply (gas bottle, gas valve)
Flame not ignited
Press the (8) button after clearing the fault
Interior lighting is Close door, check door contact
switched on
230 V mode:
Arrange replacement of 230V heating element,
230V heating ele- contact Customer Service
ment defective
12 V mode: Arrange replacement of 12V heating element,
12V heating ele- contact Customer Service
ment defective
Temperature sensor Contact Customer Service
without contact or
defective
Burner defective Check burner, burner nozzles, if
or cooling unit necessary contact Customer Service and
defective arrange replacement