Operator Common Screen - Hyundai N5000 Instruction Manual

N5000 INSTRUCTION MANUAL N5000 INSTRUCTION MAN N5000 INSTRUCTION MAN N5000 INSTRUCTION MAN

4.3.3 Operator common screen

Display
[10 key input method]
Figure 8 is a screen for setting or changing values on the operator.
Figure 8 is a 10KEY screen to set commanding frequency. Displayed name and input range are
changed. ('Set commanding frequency' and '0-120.0' are displayed in the figure 8 of (1). It
indicates the name of input or revised set values and possible input range. According to the set
UAL UAL UAL
Communication between main controller and operator is in
normal condition. When communication is in abnormal
condition, LED flickering is stopped or flickering cycle is
changed.
Push this button when moves from the present display screen
to the upper screen number.
Push this button when moves from the present display screen
to the below screen number.
LED flickers periodically when warning is occured. When the
condition is normal, flickering stops.
LED flickers periodically when warning is occured. When the
condition is normal, flickering stops.
RUN/STOP button.
Push this button when moves from the present group screen
to function selecting menu.
Table 1. Operator screen display and functions
Figure 8. 10KEY screen
Chapter4 4 4 4 . . . . Inverter Operation Chapter
Chapter Chapter
Description
30
Inverter Operation
Inverter Operation Inverter Operation