Operation Controlling Screen Panel - Hyundai N5000 Instruction Manual

N5000 INSTRUCTION MAN N5000 INSTRUCTION MAN N5000 INSTRUCTION MAN N5000 INSTRUCTION MANUAL

4.3.5 Operation controlling screen panel

Operation controlling screen panel comes out as shown in figure 10 when DOWN(
UP( ) button in the CELL monitoring screen panel are touched. Frequency of inverter output,
rotational direction of motor and accelerating/decelerating time of deviations of inverter output
frequency are set in this screen panel.
When each item in the screen panel is touched, 10KEY screen comes out.
Please refer to [10KEY screen input method].
(1) Output frequency: displays the current output frequency of inverter output terminal.
(2) Operational condition: displays current rotational direction of motor.
STP: stop
FWD: forward direction
REV: reverse direction
(3) Motor speed: displays the number of rotations of motor in [RPM] unit. When a speed
measurement sensor is attached, measured motor speed is displayed. When it is not attached,
the calculated motor speed is displayed.
(4) Warning cancellation
(5) Breakdown cancellation
(6) Commanding frequency: users can set frequency value in [Hz] unit.
(7) Direction setting: set rotational direction of motor. (direction cannot be changed while running)
1: ['FWD' display] Forward direction.
2: ['REV' display] reverse direction.
(8) Acceleration time: set time duration from 0Hz to base frequency. (Reference 1).
(9) Deceleration time: set time duration from base frequency to 0Hz. (Reference 1).
UAL UAL UAL
Figure 10. Operation controlling screen panel
: Cancels warning state for recovering inverter to normal state.
: Cancels breakdown state for recovering inverter to normal state.
Chapter4 4 4 4 . . . . Inverter Operation Chapter
Chapter Chapter
34
Inverter Operation
Inverter Operation Inverter Operation
)button or