Hyundai N5000 Instruction Manual page 3

Multi-level inverter

Table of Contents

N5000 INSTRUCTION MANUAL

• The equipment must be connected to the ground.

If not connected to the ground, it may cause shock and fire.

• You must first turn off the power in order to do any wiring.

• Installation must be done correctly before doing any wiring.

If done improperly, It may cause electric shock.

• An expert must do all wiring to the machine.

If wiring is done improperly, it may cause fire.

• After any installation, repair or test, you must check for water, dust or piece of wires that

might be in the machine before turning on the power.

B. Operation

• Do not touch the power switch with wet hands. It may cause electric shock.

• When switching on or off electric current, do not push wet hands to the terminal of an

inverter. It may cause electric shock.

• When applying an electric current, do not push anything inside of an inverter. It may cause

electric shock and fire.

• Check the motor if it is turning around to the correct direction. It may cause an accident

and damage to the machine.

• Check for improper sounds or vibration from the motor. It may cause an accident and

damage to the machine.

• In the inverter operator, there is a function to change a variable, invariable and memory that

may induce severe system failure. An expert may only operate this.

• Do not use operator function while the inverter is in use.

C. Repair, Inspection and changing parts

• When inspecting the equipment, turn off the power and wait ten minutes before inspection

to avoid electric shock.

• An expert should do all repairs or changing parts to the machine. (You must remove all

metal parts from your body, which includes watches and other jewelry before working on the

machine.) Only use insulatied tools.

D. Caution of Use

• To avoid electric shock or accidents, use only designated parts and tools for this machine.

DANGER

CAUTION

DANGER

SAFETY PRECAUTIONS

Table of Contents