Group C Screen 3 - Hyundai N5000 Instruction Manual

N5000 INSTRUCTION MAN N5000 INSTRUCTION MAN N5000 INSTRUCTION MANUAL N5000 INSTRUCTION MAN
4.3.17 Group C Screen 2
'Group C Screen 2' screen panel comes out when DOWN (
panel or UP ( ) button in 'Group C Screen 3' screen panel is touched. Another 8 digital input
channels, which have their own specific functions, (9~16 channel) are monitored in this screen
panel. When the terminal has 'ON' value, green light is appears in the sqare box beside the item
name. When the terminal has 'OFF' value, green light is turned off (black)
When touching any button in the screen panel, 10KEY screen comes out for inputting values.
(1) Digital input 9: Receives 'IN VCB' (Input Vacuum Circuit Breaker) signal. This item monitors
ON/OFF state of input circuit breaker for input voltage (3300[V] or 6600[V]). The item of this
terminal should be checked before test operation for safety.
Close: [green light] Input circuit breaker is ON.
Open: [no light] Input circuit breaker is OFF.
(2) Digital input 10: Receives 'OUT VCB' (Output Vacuum Circuit Breaker) signal. This item
monitors ON/OFF state of output circuit breaker for output voltage (3300[V] or 6600[V]). The
item of this terminal should be checked before test operation for safety.
Close: [green light] Ouput circuit breaker is ON.
Open: [no light] Ouput circuit breaker is OFF.
(3) Digital input 11: Receives 'FAN PWR' (Fan PoWeR) signal. FAN power of the panel is monitored
at this terminal.
Close: [green light] FAN power OFF.
Open: [no light] FAN power ON.
[Caution] This input terminal monitored by the main controller when inverter is running.
When inverter is turned off, this terminal will not be monitored. If green light is shown in this
item while inverter is running, warning of 'fan MC1 breakdown' will be on.
UAL UAL UAL
Figure 24 Group C screen 2
56
Chapter4 4 4 4 . . . . Inverter Operation Chapter Inverter Operation
Chapter Chapter Inverter Operation Inverter Operation
) button in 'Group C Screen 1' screen