Hyundai N5000 Instruction Manual page 72

N5000 INSTRUCTION MAN N5000 INSTRUCTION MAN N5000 INSTRUCTION MANUAL N5000 INSTRUCTION MAN
4.3.26 Group E Screen 3
'Group E Screen 3' screen panel comes out when DOWN button (
( ) button in 'Group E Screen 4' screen panel is touched. Initialization of fault and parameter
values is performed according to the set value, which is set in 'Group B Screen 2', when 'START'
button is touched in this panel. And the progress is shown by the bar-graph and the text.
T T T T ext on the screen ext on the screen ext on the screen ext on the screen
NON
Trip
Para
TIME
All
UAL UAL UAL
Initialize the error data and parameter Initialize the error data and parameter Initialize the error data and parameter Initialize the error data and parameter
Initializing Initializ Initializ Initializ ing ing ing
Figure 31 Group E screen 3
Group B Screen 2 Group B Screen 2 Group B Screen 2 Group B Screen 2
0
1
2
3
4
Chapter4 4 4 4 . . . . Inverter Operation Chapter
Chapter Chapter
Description Description Description Description
No initialization.
Initializes history of system failures and warnings.
Initializes set values (parameters).
Initializes time.
Initializes all.
69
Inverter Operation
Inverter Operation Inverter Operation
) in 'Group E Screen 2' or UP