Post Tender; Receipt On/Off And Receipt On Request - Sam4s NR-500 series Operating And Programming Manual

Post Tender

Post tendering means computing change after the sale has been totaled and the drawer is
open. This feature is useful when a customer changes the amount of the tender or when a
"quick change artist" confuses a clerk. Normally, this function is not allowed. If you
wish to allow post tendering, you must set the appropriate options program. See
"SYSTEM" of "Options Programming" in the "Program Mode Programming" chapter.
(A separate system option determines whether the drawer opens on the post tender.)
1. Register the items you wish to sell.
2. Press CASH:
3. The display will indicate the total of
the cash sale.
4. Enter the amount of the new tender,
Press CASH:
5. The display will indicate the change
due.

Receipt On/Off and Receipt on Request

When a receipt is not normally issued, you can turn the receipt function off. See "Receipt
On/Off" in the "Manager Mode (X Mode)" chapter.
If the receipt is off, you can still issue a receipt after the sale has been completed.
Printing a Receipt after the Sale
After the sale has been totaled, but before the next transaction is started, press CASH:
CASH
60 • Operations
CASH
2 0 0 0
07/21/2014 MON
PLU1 T1
TAX1
TOTAL
CASH
CLERK 01
CASH
THANK-YOU
CALL AGAIN
08:33
$2.00
$0.12
$2.12
$2.12
000011 00001
SAM4S NR-500 Series Manual