Table of Contents
Advertisement
PAPER HANDLING
SWITCHING PAPER TYPES
3-20
If you have more than one type of job, it is often necessary to switch between
continuous forms and single sheets. This section explains how to switch
between paper types. It is not necessary to remove the continuous forms
paper from the printer.
Switching to Single Sheets
To switch from continuous forms to single sheets:
1. Tear off your printed pages.
2. Retract the forms paper to the park position by pressing the LOAD
button. The PAPER OUT indicator turns red.
CAUTION
Failure to retract the forms paper will cause paper jams.
3. Move the paper select lever forward to the single sheet position.
4. Mount the cut sheet stand. (For details, see the section Using Single
Sheets earlier in this chapter.) If you are using the cut sheet stand,
press the LOAD button to advance the paper to the top-of-form
position.
You are now ready to print using single sheets.
User's Manual
Advertisement
Table of Contents
