Table of Contents
Advertisement
USING SETUP MODE
5-46
Table 5.6 CONFIG Items and Options (Cont.)
NOTE: Underlined options are the factory defaults.
CONFIG Items
Options
SKIP-PR
ENABLE
DISABLE
STATUS
ENABLE
DISABLE
BANDCTL
ENABLE
DISABLE
Description
Setting of printing speed change
processing (skip)
The skip processing is executed.
When a certain amount of blank
spaces are found in a line, it changes
the printing speed for the blank
spaces.
The skip processing is not executed.
It does not change the printing speed
for the blank spaces.
- If the printing speed of the printing
data varies before and after the
blank spaces (such as LQ
characters + blank space + CQ
characters), it changes printing
speeds regardless of this setting.
Setting of the asynchronous status
function
The status information is stored in the
send buffer by a nibble mode request.
The status information is not stored in
the send buffer by a nibble mode
request.
Setting of reducing backward line
feeds as much as possible. Backward
line feeds occur when printing vertical
enlargement characters or multi-path
characters which involve several
printing paths for a print activation.
Reduce control is performed.
Reduce control is not performed.
User's Manual
Advertisement
Table of Contents
