Table of Contents
Advertisement
Type
Select
Sub Function
Self Diagnostic
Function
<EMULATE>
<FONT>
COUR 10
PRSTG12
COUR-I
N.SAN-N
<QUALITY>
User's Manual
Table 5.1 Setup Mode Functions (Cont.)
Function
DEFAULT
LIST
SELF-TST
HEX-DUMP
V-ALMNT
To select a function from the <<FUNCTION>> menu:
1. Repeatedly press the LOAD button or the LF/FF button to position
the red cursor on the plastic print guide under the function you require.
The LOAD button moves the cursor to the next option and the LF/FF
button moves the cursor to the previous option.
2. Press the TEAR OFF button or the MENU button to select the
function. If the function has items and options, the printer prints the
first item and its options. The MENU1, MENU2, HARDWRE,
ADJUST, and CONFIG functions contain items that have selectable
options. The other functions have neither items nor options.
The first three MENU1 items and their options are shown below.
Items are enclosed in single brackets < >.
DPL24C+
XL24E
ESC/P2
COMPRSD
BOLDFCE
PICA 10
N.SAN-B
N.SAN-I
TIMLS-N
LETTER
REPORT
DRAFT
Purpose
Resets factory defaults in MENU1 and MENU2.
Prints a list of all currently selected options.
Runs the self-test.
Prints hex dumps.
Checks and corrects vertical print alignment.
CORRESP
OCR-B
OCR-A
TIMLS-B
TIMLS-I
DOWNLD0
HI-DRAFT
USING SETUP MODE
COUR-N
COUR-B
DOWNLD1
5-5
Advertisement
Table of Contents
