Table of Contents
Advertisement
USING SETUP MODE
5-8
4. Select the current emulation.
Since you do not want to change the emulation, press the MENU
button to select the current emulation and print the next item,
<FONT> and its options.
5. Change the font to Prestige Elite 12.
Press the LOAD button or the LF/FF button once to position the
cursor beneath PRSTG12. Press the MENU button to select
PRSTG12 and print the next item, <QUALITY>, and its options.
6. Select the current print quality.
Since you do not want to change the print quality, press the MENU
button to select the current print quality and print the next item,
<PITCH>, and its options.
7. Change the pitch to 12 cpi and exit the MENU2 function.
Press the LOAD button or the LF/FF button once to position the
cursor under 12 CPI. Since you do not want to make any other
changes in MENU2, press the ONLINE button to select 12 CPI and
exit MENU2. The <<FUNCTION>> menu is then reprinted.
8. Exit setup mode, saving the new font and pitch.
Since the cursor is under SAVE & END, press the MENU button or
the TEAR OFF button to select SAVE & END. The printer saves
Prestige Elite 12 and 12 cpi as the new power-on defaults in MENU2.
The printer then exits setup mode and returns online. These settings
remain in effect until changed.
User's Manual
Advertisement
Table of Contents
