Table of Contents
Advertisement
TROUBLE-SHOOTING
7-8
Operating Problems
If any of the errors listed in Table 7.3 occurs, the PAPER OUT LED lights
up, and an alarm beeps, and the printer goes offline.
In such cases, the buttons on the control panel can be used in the same
manner as those when the printer is in the offline state.
Table 7.3 Operating Problems and Solutions
Error name
Paper end (PE) error Paper end is detected. (*1)
tray.
Eject jam error
Paper end is not detected
even after a large amount
of continuous forms or cut
sheets were ejected.
Continuous form/
In continuous form loading
cut sheet switch
status, the continuous form/
lever error
cut sheet switch lever is
switched to cut sheet mode.
In cut sheet loading status,
the continuous form/cut
sheet switch lever is
switched to continuous form
mode.
If the error occurs, all
buttons are disabled.
Error description
Recovery method
- Insert and load the
paper in the paper
- Eject forms or sheets.
- Press the online button
to turn the printer
online.
- Switch the continuous
form/cut sheet switch
lever back to its
original position.
- Remove the loaded
paper.
User's Manual
Advertisement
Table of Contents
