Table of Contents
Advertisement
User's Manual
6. Readjust the right paper guide, leaving a slight gap between the paper
guide and the right edge of the paper. About 1.5 mm (1/16 inch) is
sufficient. Pull the right locking lever forward.
7. Push the bin lever down to the "CLOSED" position.
8. Load paper to the top-of-form position using either of the following
methods:
• Load the paper manually. Press the LOAD button. The paper will
advance to the top-of-form position. Adjust the position of the
paper as needed by simultaneously pressing the ONLINE button
and the LF/FF button or the LOAD button (micro feed).
After adjusting the position of the paper, the data can be saved by
pressing the ONLINE button and MENU button. This function is
available only immediately after adjusting the position of the paper.
• Load the paper using your software. Press the ONLINE button to
place the printer online. Load paper according to the instructions in
your software documentation. Most software packages load paper
automatically.
9. Place the printer online. Print a sample page and check the page
margins. Make the following adjustments, as necessary:
• Horizontal alignment. Readjust the paper guides if required.
• Top-of-form setting (see Chapter 5).
• Margin settings. Use your software or the printer setup mode (see
Chapter 5).
PAPER HANDLING
3-11
Advertisement
Table of Contents
