Chapter8 Installing Options; Installing The Cut Sheet Feeder - Fujitsu DL 3750+ User Manual

INSTALLING THE CUT
SHEET FEEDER
User's Manual
INSTALLING OPTIONS
The installaion of options allows you to expand
the capabilities of your printer. Options available
for the printer include:
• LAN card
• Single bin cut sheet feeder
• Double-bin adapter for cut sheet feeder
• RS-232C serial interface board
The LAN card is a user installable option, but can be installed only on a
printer model with the parallel and USB interfaces. For information on the
installation procedure, refer to the manual that comes with the LAN card.
Note that the RS-232C serial interface is a factory or dealer installable option.
Options can be purchased from your dealer. Order numbers for options are
given in Appendix A.
See Appendix A to check if your printer supports CSF option.
This chapter describes what to do after installing cut sheet feeder.
A cut sheet feeder allows you to automatically feed single sheet.
The ASF300 single-bin feeder is available as an option for the 136-column
printer.
For the 136-column printer, a double-bin adapter can be added to the single-
bin feeder.
Single bin cut sheet feeder
For details on using your cut sheet feeder, see the section Loading Paper in
the Cut Sheet Feeder (Option) in Chapter 3.
INSTALLING OPTIONS
ASF300
8
8-1