USING SETUP MODE
5-26
Table 5.3 MENU1 and MENU2 Items and Options (Cont.)
NOTES:
• Underlined options are the factory defaults.
• Asterisks identify items and options that differ for the IBM XL24E and
Epson ESC/P2 emulations. The notes are defined at the end of the table.
MENU1 and
Options
MENU2 Items
<DC3-CDE>
ENABLE
(*4)
DISABLE
<CR-CODE>
CR ONLY
CR & LF
<LF-CODE>
LF ONLY
(*3)
LF & CR
Description
Enables the DC1 and DC3 codes.
Any data received between DC3 and
the next DC1 is ignored.
Disables the DC1 and DC3 codes. These
codes are then ignored.
No line feed is added to a carriage
return.
A line feed is added to each carriage return.
No carriage return is added to a line
feed.
A carriage return is added to each line feed.
User's Manual