Table of Contents
Advertisement
PAPER HANDLING
3-10
Adjusting the left margin
To help align the left paper guide, use the inch-based ruler located behind the
paper guides. The ruler is graduated in 10 columns per inch. For example,
setting the left paper guide 12.7 mm (0.5 inch) from the left gives a left margin
of 6.3 mm (0.25 inch) plus the left margin specified by your software or the
printer setup mode.
• Slide the right paper guide until the distance between the two guides is
the approximate width of your paper.
5. Manually fan the stack of paper and place it in the paper bin.
NOTE
A short vertical mark inside each paper guide indicates the
maximum capacity of the bin. Make sure that your paper stack
does not cover these vertical marks.
Open
Close
Bin lever
Loading the cut sheet feeder
Make sure that the left edge of your
paper falls within this area.
User's Manual
Advertisement
Table of Contents
