Table of Contents
Advertisement
PAPER HANDLING
SWITCHING PAPER TYPES
3-24
Micro Feed
Use the micro feed function to fine tune the position of the paper. This
function is valid when the printer is offline. Press the ONLINE and
LF/FF buttons simultaneously to micro-feed paper forward. Press the
ONLINE and TEAR OFF buttons simultaneously to micro-feed paper
backward.
Remember that the top-of-form will slip from the original setting.
Load Position Adjust
Use also the micro feed function to adjust the load position of the
paper. This function is valid when the printer is offline. When this
function is used immediately after the LOAD button is pressed, the
adjusted position is retained as the new load position until the power is
turned off. Pressing the ONLINE and LOAD buttons simultaneously
saves the new position permanently.
If you have more than one type of job, it is often necessary to switch
between continuous forms and single sheets. This section explains
how to switch between paper types. It is not necessary to remove the
continuous forms paper from the printer. This function is not available
for pull-tractor feed.
NOTE
This function is not available for continuous forms paper that is fed
by the pull-tractor.
User's Manual
Advertisement
Table of Contents
