Table of Contents
Advertisement
USING SETUP MODE
5-44
Table 5.6 CONFIG Items and Options (Cont.)
NOTE: Underlined options are the factory defaults.
CONFIG Items
Options
<AREACNT>
ENABLE
DISABLE
<ON-LOAD>
OFFLINE
ONLINE
<LOCK>
NONE
SETUP
ALL
<//S//>
DISABLE
ENABLE
Description
Area-over detection control.
Detects the left and right edges of
paper when loading the paper.
The printer does not print data beyond
the edges, but turns on the AREA
OVER indicator.
Does not detect the edges. Select this
option when you are using colored or
preprinted paper.
Printer status after loading paper in
offline mode.
Remains offline after paper loading.
Goes into online after paper loading.
Lock function of setup mode.
Enables all buttons on the control panel.
Disables the setup-related buttons to keep the
printer from entering setup mode during the
offline state.
Disables the setup-related buttons and the
MENU button.
Once this setting has been selected, setup mode
cannot be entered from the control panel. To
cancel this setting, turn the power on while
simultaneously pressing the MENU,
TEAROFF, and LF/FF buttons.
Effectiveness of the Cut Sheet Selection
command (//S//).
Makes the command ineffective.
Makes the command effective.
Note:The Cut Sheet Selection command
(//S//) changes the paper source to
the paper table and waits for
manual insertion of a cut sheet.
User's Manual
Advertisement
Table of Contents
