DETEWE OpenHotel 100 User Manual page 23

Communications systems opencom 100 and opencom x300 for hoteliers
Table of Contents

Advertisement

Configuration and Administration
Installing Black Lists and Call Filters for Hotel Guests
It is also possible to block specific call numbers directly with the provider of R-calls.
For this, you will need to issue all providers with a list of destination call numbers
(e. g. the MSNs on a multi-terminal access). As this is time consuming and must be
repeated for each new provider, we recommend instead that you configure the
option Call Distribution in the menu PBX Configuration appropriately.
Call distribution on system access (PTP)
In the Call Distribution: Incoming: PTP menu you can associate the external
extension number of the room telephones with the internal call number of
reception. If the reception telephone is the hotel's operator then enter a star (*).
System access: Associating receptions call number with room extension numbers
Similarly, in the Call Distribution: Outgoing PTP menu you can associate the
room extension numbers with the call number of reception. When a guest makes
an external call, the call number of reception is displayed on the terminal of the
person being called.
Call distribution: Incoming on multi-terminal access (PTMP)
With a multi-terminal access, room telephones are normally not directly accessible
from external terminals, instead external calls are switched via reception. If this is
not the case and an MSN has been assigned to a room telephone, then in the
menu Call distribution: Incoming PTMP you must associate the MSN with the
internal call number of the reception telephone.
21

Advertisement

Table of Contents
loading

Table of Contents