Setting A Position Fixing Mode [Menu]; Setting A Hdop Level [Menu] - JRC JMA-5104 Instruction Manual

Marine radar equipment
Hide thumbs Also See for JMA-5104:
Table of Contents

Advertisement

4. Setting a position fixing mode [MENU]

This function sets a position fixing mode of a GPS receiver and sends the information to a GPS
receiver.
2D cannot obtain height information in two-dimensional position fixing.
3D cannot obtain height information in three-dimensional position fixing.
AUTO automatically selects the optimum of 2D and 3D position fixing.
Use the following procedure to set a position fixing mode to GPS receiver.
Use the following procedure to set a position fixing mode to GPS receiver.
Use the following procedure to set a position fixing mode to GPS receiver.
Use the following procedure to set a position fixing mode to GPS receiver.
(a) Display the INSTALLATION menu by pressing the [MENU] key in long mode, select
GPS , GPS SETTING , and FIX MODE , and press [JOG DIAL] or [ACQ/ENT].
(b) When the following menu is displayed, select 2D , 3D , or AUTO by turning [JOG
DIAL] and end the operation by pressing [JOG DIAL] or [ACQ/ENT].

5. Setting a HDOP level [MENU]

This function sends a HDOP level of a GPS receiver to a GPS receiver.
Three HDOP levels, 4, 10, 20 are available. The lower the value, the higher is the precision.
However, position fixing becomes more difficult.
Normally, customers need not set this information.
Normally, customers need not set this information.
Normally, customers need not set this information.
Normally, customers need not set this information.
Use the following procedure to set a HDOP level to a GPS receiver.
Use th
e following procedure to set a HDOP level to a GPS receiver.
Use th
Use th
e following procedure to set a HDOP level to a GPS receiver.
e following procedure to set a HDOP level to a GPS receiver.
(a) Display the INSTALLATION menu by pressing the [MENU] key in long mode, select
GPS , GPS SETTING , and HDOP LEVEL , and press [JOG DIAL] or [ACQ/ENT].
(b) When the following menu is displayed, select 4 , 10 , or 20 by turning [JOG DIAL]
and end the operation by pressing [JOG DIAL] or [ACQ/ENT].
GPS SETTING
POSITION
N 36°36.000'
E136°36.000'
ANTENNA HEIGHT 10M
GEODETIC DATUM WGS-84
FIX MODE
AUTO
2D
10
3D
MANUAL 2S
AUTO
00 00 00
00 00 00
MASTER RESET
TX COMMAND
GPS SETTING
POSITION
N 36°36.000'
E136°36.000'
ANTENNA HEIGHT 10M
GEODETIC DATUM WGS-84
FIX MODE
AUTO
HDOP LEVEL
10
4
MANUAL 2S
10
00 00 00
20
00 00 00
MASTER RESET
TX COMMAND
173

Advertisement

Table of Contents
loading

This manual is also suitable for:

Jma-5106Jma-5110Nke2042

Table of Contents