Table of Contents
Advertisement
(i)
Adjust the main bang suppression level by turning [JOG DIAL] and erase the main bang.
After completion of adjustment of the suppression level, end the operation by pressing
[JOG DIAL] or [ACQ/ENT].
Consequently, the main bang suppression level has been adjusted.
(j)
Select MBS RNG by turning [JOG DIAL], set the main bang erasing range and end the
operation by pressing [JOG DIAL] or [ACQ/ENT].
(k) Adjust and set the main bang suppression range by turning [JOG DIAL] and end the
operation by pressing [JOG DIAL] or [ACQ/ENT].
Consequently, the main bang suppression range has been adjusted.
9.8.4 Setting a close range dynamic range [MENU]
Set a range for changing a close range dynamic range. A range from 0.0 to 3.3 miles can be set.
Use the following procedure to set a close range dynamic range.
Use the following procedure to set a close range dynamic range.
Use the following procedure to set a close range dynamic range.
Use the following procedure to set a close range dynamic range.
(a) Display the INSTALLATION menu by pressing the [MENU] key in long mode, select
RADAR ,
[ACQ/ENT].
(b) Adjust the main bang suppression level by turning [JOG DIAL] and erase the main bang.
After completion of adjustment of the suppression level, end the operation by pressing
[JOG DIAL] or [ACQ/ENT].
RADAR ADJUST2 , and
Ｍ Ｍ Ｍ Ｍ Ｂ Ｂ Ｂ Ｂ Ｓ Ｓ Ｓ Ｓ Ｌ Ｌ Ｌ Ｌ Ｖ Ｖ Ｖ Ｖ Ｌ Ｌ Ｌ Ｌ
1 1 1 1 2 2 2 2 8 8 8 8
Ｍ Ｍ Ｍ Ｍ Ｂ Ｂ Ｂ Ｂ Ｓ Ｓ Ｓ Ｓ Ｒ Ｒ Ｒ Ｒ Ｎ Ｎ Ｎ Ｎ Ｇ Ｇ Ｇ Ｇ
1 1 1 1 2 2 2 2 8 8 8 8
DR NEAR RNG. , and press [JOG DIAL] or
162
Advertisement
Table of Contents
