General Operation; Eliminating Radar Interference [Menu] - JRC JMA-5104 Instruction Manual

3.5 General Operation

3.5.1 Eliminating radar interference [MENU]

If radar interference occurs, take the following steps to set an interference elimination level:
(a) Press the [MENU] key to display MENU .
(b) Select BASIC and then INTERFERENCE pressing the [JOG DIAL] or [ACQ/ENT]
key after each selection.
(c) The menu below is displayed. Select OFF , IR1 , IR2 , or IR3 , and then press the
[JOG DIAL] or [ACQ/ENT] key to determine the selection.
Note
The interference elimination levels are
However, if the set level is too high, a problem such as the decrease of sensitivity occurs. The lowest
level IR1 should be selected for general use.
BASIC
INTERFERENCE IR1
OFF OFF
IR1 OFF
IR2 3.0
IR3 FULL
ZOOM OFF
→ IR2 → IR3 starting with the lowest level.
IR1
44