Table of Contents
Advertisement
Use the following procedure to set a video gradation level.
Use the following procedure to set a video gradation level.
Use the following procedure to set a video gradation level.
Use the following procedure to set a video gradation level.
(a) Display the INSTALLATION menu by pressing the [MENU] key in long mode, select
RADAR ,
[ACQ/ENT].
(b) When the following menu is displayed, select OFF , LEVEL 1 , or LEVEL 2 by
turning [JOG DIAL] and end the operation by pressing [JOG DIAL] or [ACQ/ENT].
9.8.7 Setting a small target detection mode [MENU]
This function detects a distant faint target on a radar image.
To detect a distant faint target, increase a detection probability by reducing the scanner unit
rotation speed and focusing radio waves of the radar to a distant faint target.
Note
Since 4kw is a radome type and does not have a motor rotation control function, this function does not
operate even if it is set to ON.
Use the following procedure to set a small target detection mode.
Use
Use
Use
the following procedure to set a small target detection mode.
the following procedure to set a small target detection mode.
the following procedure to set a small target detection mode.
(a) Display the INSTALLATION menu by pressing the [MENU] key in long mode, select
RADAR , RADAR SETTING , and S-BUOY DETECT , and press [JOG DIAL] or
[ACQ/ENT].
(b) When the following menu is displayed, select ON by turning [JOG DIAL] and end the
operation by pressing [JOG DIAL] or [ACQ/ENT].
RADAR SETTING , and
RADAR SETTING
VIDEO LATITUDE NARROW
VD NOISE REJ
OFF
LEVEL1
LEVEL2
DR RANGE CONT OFF
TGT EXP LEVEL LEVEL1
TGT EXP PROC
GAIN OFFSET
RADAR SETTING
VIDEO LATITUDE NARROW
VD NOISE REJ
S-BUOY DETECT
OFF
ON
DR RANGE CONT OFF
TGT EXP LEVEL LEVEL1
TGT EXP PROC
GAIN OFFSET
VD NOISE REJ , and press [JOG DIAL] or
LEVEL1
OFF
OFF
OFF
OFF
0
LEVEL1
OFF
OFF
OFF
OFF
0
164
Advertisement
Table of Contents
