Table of Contents
Advertisement
As shown in the figure below, EBL2 moves to the cursor position. If VRM2 is displayed at the
same time, the center of VRM2 also moves to the fulcrum of EBL2.
7. Setting EBL display
EBL can select true bearing or relative bearing.
True bearing means that the EBL bearing viewed from the own ship indicates the absolute
bearing on the earth.
Relative bearing means that the EBL bearing viewed from the own ship indicates the relative
bearing between the own ship and EBL.
Caution
● ● ● ● True bearing and relative bearing are switched for both EBL1 and EBL2.
Thus, they cannot be set for EBL1 and EBL2 separately.
If true bearing presentation is selected, the value of EBL is displayed following by "T." If
relative bearing presentation is selected, the value of EBL is displayed following by "R."
DISP OPTIONS
EBL BEARING
FROATING EBL
OFF
ON
VRM2 UNITS
WAYPOINT
POSITION
LL-TD CONV>
With EBL2 being placed in floating EBL mode
TRUE
OFF
OFF
NM
NM
OFF
LL
53
Advertisement
Table of Contents
