Function Setting Menu Items - JRC JMA-9123-7XA Instruction Manual

>
JMA-9100 Instruction Manual 3.BASIC OPERATION
3.9.1.3 Changing Function Setting (memory contents change)
To change the memory contents of functions 1 to 4, use the function setting menu.
For how to operate the function setting menu, see Section 3.9.3 "Overview of Function
Operations (User Function Setting)".
3.9.2

Function Setting Menu Items

The function setting menu has the items below.
page 1
1. Mode
2. IR
3. Process
4. Target Enhance
5. AUTO Sea/Rain
6. Save Present State
page 2
1. Pulse Length 0.75NM
2. Pulse Length 1.5NM
3. Pulse Length 3/4NM
4. Pulse Length 6/8NM
5. Pulse Length 12NM
6. Pulse Length 16NM
page 3
1. Video Latitude
2. Video Noise Rejection
3. AUTO Dynamic Range
4. Process Switch
5. 2nd Process Mode
6. Process Switch Range
7. Fast Target Detection
page 4
1. Trails Interval
2. Trails Mode
3. Trails Reference Level
4. Trails Reduction
6. Trails Process
7. Max Interval
page 5
1. Gain Offset
2. PRF
3. Small Buoy Detection
4. Fishnet Detection
5. Antenna Height
8. Set Mode Default
9. Initialize
>
3.9 USE FUNCTION KEY [USER]
Name of the mode to be used
Radar interference rejection
Video process
Target expansion
Automatic clutter suppression
Saving the present state
Standard pulse length for 0.75nm range
Standard pulse length for 1.5nm range
Standard pulse length for 3nm range
Standard pulse length for 6nm range
Standard pulse length for 12nm range
Standard pulse length for 16nm range
Dynamic range of radar video
Radar video noise rejection
Automatic dynamic range control
Radar video process switching
2nd video process mode
Video process switching range
Radar trails length
Radar trails plotting threshold
Thinning of radar trails
Superimpose-display of time radar trails and
continuous radar trails.
Maximum time for radar trails display
Gain correction
Transmitting repetition frequency
Small target detection mode
Fishnet detection mode
3－ 112
Option
Coast/Deepsea/....
Off/Low/Middle/High
PROC Off/3Scan CORREL/....
Off/Level1/Level2/Level3
Off / AUTO Sea / AUTO Sea/Rain
Option
SP1/MP1
SP1/MP1/MP2/MP3
MP1/MP2/MP3/LP1
MP1/MP2/MP3/LP1/LP2
MP1/MP2/MP3/LP1/LP2
MP1/MP2/MP3/LP1/LP2
Option
Narrow/ Normal /Wide/Super Wide
Off/Level1/Level2
Off/On
Off/Range FIX/AUTO
PROC Off/3Scan CORREL/....
Off/On
Option
Off/15sec/....
True/Relative
Level1-4
Off/Level1-3
Off/On
Short/Middle/Long
Option
Normal/Economy/High Power
Off/On
Off/On
Default/-5m/5-10m/10-20m/20m