Cisco Small Business Pro SPA9000 Administration Manual page 78

Configuring Phone Lines and Calling Routing Behavior
Configuring Dial Plans
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
STEP 8
STEP 9
STEP 10
STEP 11
SPA9000 Voice System Administration Guide
Downloaded from www.Manualslib.com
Start Internet Explorer, and then enter the IP address of the SPA9000. Click Admin
Login and then click Advanced.
Click the PBX Status link near the top right corner or lower left corner of the page,
to view the list of client stations.
Click the hyperlink in the IP Address column for the first phone that you want to
configure. The telephone configuration page appears in a separate browser
window.
Click the Ext 1 tab, or the tab for the extension that you want to configure.
Scroll down to the Dial Plan section.
Enter the digit sequences in the Dial Plan field.
•
The default (US-based) system-wide dial plan appears automatically in the
field. You can delete digit sequences, add digit sequences, or replace the
entire dial plan with a new dial plan. For more information and examples, see
"Digit Sequences," on page
•
Separate each digit sequence with a pipe character, and enclose the entire set
of digit sequences within parentheses. Refer to the following example:
(9,8<:1408>[2-9]xxxxxx | 9,8,1[2-9]xxxxxxxxx | 9,8,011xx.
| 9,8,xx.|[1-8]xx)
Click Submit All Changes. The phone reboots.
If you need to configure a dial plan for any other extensions on the phone
(depending on the model), click the appropriate Extension tab, enter the dial plan,
and submit the changes.
Click the browser's Back button to return to the list of phones.
Repeat this procedure for each client station that needs a unique dial plan.
Verify that you can successfully complete a call using each digit sequence that
you entered in the dial plan.
If you hear a reorder (fast busy) tone, you need to review your entries and modify
NOTE
the dial plan appropriately. See
manuals search engine
66.
"Digit Sequences," on page
4
66.
76