Cisco Small Business Pro SPA9000 Administration Manual page 227

SPA9000 Field Reference
Voice tab
SPA9000 Voice System Administration Guide
Downloaded from www.Manualslib.com
Second Dial Tone
Outside Dial Tone
Prompt Tone
Busy Tone
Reorder Tone
Off Hook Warning Tone
Ring Back Tone
Confirm Tone
SIT1 Tone
SIT2 Tone
manuals search engine
Alternative to the Dial Tone when the user dials a three-way
call.
Default: 420@-19,520@-19;10(*/0/1+2)
Alternative to the Dial Tone. It prompts the user to enter an
external phone number, as opposed to an internal extension.
It is triggered by a, (comma) character encountered in the dial
plan.
Default: 420@-16;10(*/0/1)
Prompts the user to enter a call forwarding phone number.
Default: 520@-19,620@-19;10(*/0/1+2)
Played when a 486 RSC is received for an outbound call.
Default: 480@-19,620@-19;10(.5/.5/1+2)
Played when an outbound call has failed or after the far end
hangs up during an established call. Reorder Tone is played
automatically when <Dial Tone> or any of its alternatives
times out.
Default: 480@-19,620@-19;10(.25/.25/1+2)
Played when the caller has not properly placed the handset
on the cradle. Off Hook Warning Tone is played when
Reorder Tone times out.
Default: 480@10,620@0;10(.125/.125/1+2)
Played during an outbound call when the far end is ringing.
Default: 440@-19,480@-19;*(2/4/1+2)
Brief tone to notify the user that the last input value has been
accepted.
Default: 600@-16; 1(.25/.25/1)
Alternative to the Reorder Tone played when an error occurs
as a caller makes an outbound call. The RSC to trigger this
tone is configurable on the SIP screen.
Default: 985@-16,1428@-16,1777@-16;20(.380/0/1,.380/
0/2,.380/0/3,0/4/0)
Alternative to the Reorder Tone played when an error occurs
as a caller makes an outbound call. The response status code
(RSC) to trigger this tone is configurable on the SIP screen.
Default: 914@-16,1371@-16,1777@-16;20(.274/0/1,.274/
0/2,.380/0/3,0/4/0)
B
225