Collecting System Logs And Debug Information - Cisco Small Business Pro SPA9000 Administration Manual

Basic Administration of the SPA9000
Configuring Basic Settings
STEP 4
STEP 5
SPA9000 Voice System Administration Guide
Downloaded from www.Manualslib.com
Enter the correct multicast address in the Group Page Address field.
The default value is 224. 1 68. 1 68. 1 68:34567.
NOTE
Click Submit All Changes.

Collecting System Logs and Debug Information

If you are working with an ITSP that needs more information to configure
interoperability, you can collect system logs and debug information for the
SPA9000. You can send these logs to the ITSP for their use.
Requirements:
•
You need a PC that is on the same subnetwork as the SPA9000, to capture the
log files. This PC needs to be running a syslog daemon. Enter the IP address of
this PC on the Voice > System page, in the Syslog Server and Debug Server
fields.
•
You can deploy a syslog server to receive syslog messages from the device,
which acts as a syslog client. The syslog client device uses the syslog protocol
to send messages, based on its configuration, to a syslog server. The syslog
messages can be accessed by reviewing the "syslog.514.log" file which
resides in the same directory as the slogsrv.exe syslog server application.
manuals search engine
Voice tab > SIP > PBX Parameters section
2
36