Cisco Small Business Pro SPA9000 Administration Manual page 37

Basic Administration of the SPA9000
Configuring Basic Settings
STEP 5
STEP 6
STEP 1
STEP 2
STEP 3
SPA9000 Voice System Administration Guide
Downloaded from www.Manualslib.com
Click Submit All Changes.
Enter the same multicast address in the phone configurations:
a. Click the PBX Status link to view a list of all phones.
b. Find the phone that you want to configure, and then click the hyperlink in the IP
Address column. The Telephone Configuration page appears in a separate
browser window.
c. Click the SIP tab.
d. Scroll down to the Linksys Key System Parameters section.
e. Enter the IP address in the Multicast Address field.
f. Click Submit All Changes.
g. Click the Back button on the Internet Explorer toolbar to return to the list of
phones.
h. Repeat these steps for each phone.
Setting the Group Page Address
In the group paging application, the originator sends RTP packets to an IP
multicast address at which all the other client stations are listening. This address is
chosen by the SPA9000 and is configured on the Voice > SIP page, PBX
Parameters section, Group Page Address field.
The originator starts the group page by choosing PageGroup from the Corporate
Directory on the phone, or by using a speed dial or personal directory entry. All
client stations are alerted at once. If the client station is on a call when a group
page starts, the call is automatically placed on hold. The speaker on each paged
station is turned on automatically unless the handset or headset is being used.
Group page is one-way only. The paged client stations can only listen to the call
from the originator.
Connect to the SPA9000 administration web server, and choose Admin access
with Advanced settings. (See
Server," on page 27).
Click Voice tab > SIP.
Scroll down to the PBX Parameters section.
manuals search engine
"Connecting to the SPA9000 Administration Web
2
35