Easy to install, and designed exclusively for the Cisco
32 programmable buttons simplify dialing and call transfers
Multicolored LEDs monitor the status of each configured voice line via Busy Lamp Field (BLF)
Two attendant consoles can be linked, for a total of 64 buttons
use with the Cisco SPA500 Series IP Phones. It is an ideal solution for small businesses wanting to simplify
incoming call handling by quickly directing calls to the requested party and also to monitor line status from a central
The attendant console easily attaches to a SPA500 Series IP Phone, providing 32 programmable speed-dial or
direct station select (DSS) buttons, each illuminating the line's status (idle, ringing, busy, or null) via the BLF.
Incoming calls can immediately be transferred to the proper location with the push of a button assigned to the
The modular design of the Cisco SPA500S permits up to two attendant consoles to be deployed, for a total of 64
buttons, offering an affordable solution that expands with the growth of your voice network. Installation and setup is
just a matter of connecting the supplied bracket and cable to the attendant console, which uses the phone's power
supply; no additional power source is required.
Based on the Session Initiation Protocol (SIP), the Cisco SPA500S has been tested to ensure comprehensive
interoperability with equipment from voice over IP (VoIP) infrastructure leaders, enabling service providers to offer
competitive, feature-rich services to their customers.
© 2010-2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Cisco SPA500S Expansion Module
SPA500S Expansion Module (Figure 1) is part of the Cisco Small Business Pro Series and designed for
SPA 500 Series IP Phones
Page 1 of 3