Cisco Small Business Pro SPA9000 Administration Manual page 256

SPA9000 Field Reference
Voice tab
SPA9000 Voice System Administration Guide
Downloaded from www.Manualslib.com
SIP Debug Option
Restrict Source IP
Referor Bye Delay
manuals search engine
SIP messages are received at or sent from the proxy listen
port. This feature controls which SIP messages to log.
Choices are as follows:
none—No logging.
1-line—Logs the start-line only for all messages.
1-line excl. OPT—Logs the start-line only for all messages
except OPTIONS requests/responses.
1-line excl. NTFY—Logs the start-line only for all messages
except NOTIFY requests/responses.
1-line excl. REG—Logs the start-line only for all messages
except REGISTER requests/responses.
1-line excl. OPT|NTFY|REG—Logs the start-line only for all
messages except OPTIONS, NOTIFY, and REGISTER
requests/responses.
full—Logs all SIP messages in verbose mode.
full excl. OPT—Logs all SIP messages in full text except
OPTIONS requests/responses.
full excl. NTFY—Logs all SIP messages in full text except
NOTIFY requests/responses.
full excl. REG—Logs all SIP messages in full text except
REGISTER requests/responses.
full excl. OPT|NTFY|REG—Logs all SIP messages in full text
except for OPTIONS, NOTIFY, and REGISTER requests/
responses.
Default: None
If line interfaces use the same SIP Port value and the Restrict
Source IP feature is enabled, the proxy IP address for Lines 1
and 2 is treated as an acceptable IP address for both lines. To
enable the Restrict Source IP feature, select yes. Otherwise,
select no. A source IP address is untrusted if it does not
match any of the IP addresses resolved from the configured
<Proxy> (or <Outbound Proxy> if <Use Outbound Proxy> is
yes).
Default: no
Controls when the SPA9000 sends BYE to terminate stale call
legs upon completion of call transfers. Multiple delay settings
(Referor, Refer Target, Referee, and Refer-To Target) are
configured on this screen. For the Referor Bye Delay, enter
the appropriate period of time in seconds.
Default: 4
B
254