Cisco Small Business Pro SPA9000 Administration Manual page 235

SPA9000 Field Reference
Voice tab
SPA9000 Voice System Administration Guide
Downloaded from www.Manualslib.com
Block CID Per Call Deact
Code
Block ANC Act Code
Block ANC Deact Code
DND Act Code
DND Deact Code
CID Act Code
CID Deact Code
CWCID Act Code
CWCID Deact Code
Dist Ring Act Code
Dist Ring Deact Code
Speed Dial Act Code
Secure All Call Act Code
Secure No Call Act Code
Secure One Call Act
Code
Secure One Call Deact
Code
Conference Act Code
manuals search engine
Removes caller ID blocking on the next inbound call.
Default: *82
Blocks all anonymous calls.
Default: *77
Removes blocking of all anonymous calls.
Default: *87
Enables the do not disturb feature.
Default: *78
Disables the do not disturb feature.
Default: *79
Enables caller ID generation.
Default: *65
Disables caller ID generation.
Default: *85
Enables call waiting, caller ID generation.
Default: *25
Disables call waiting, caller ID generation.
Default: *45
Enables the distinctive ringing feature.
Default: *26
Disables the distinctive ringing feature.
Default: *46
Assigns a speed dial number.
Default: *74
Makes all outbound calls secure.
Default: *16
Makes all outbound calls not secure.
Default: *17
Makes the next outbound call secure. (It is redundant if all
outbound calls are secure by default.)
Default: *18
Makes the next outbound call not secure. (It is redundant if all
outbound calls are not secure by default.)
Default: *19
If this code is specified, the user must enter it before dialing
the third party for a conference call. Enter the code for a
conference call.
B
233