Cisco Small Business Pro SPA9000 Administration Manual page 225

SPA9000 Field Reference
Voice tab
SPA9000 Voice System Administration Guide
Downloaded from www.Manualslib.com
Phone Config XML
Use LVS_PROXY
CTI Enable
manuals search engine
XML configuration to be served to the phones when they
request the init_$MA.xml file from the SPA9000 during their
first-time initialization (either a brand-new phone or after a
factory reset). If this parameter is empty, the SPA9000 serves
the normal auto-generated startup XML configuration file to
the phone instead.
The purpose of this parameter is to facilitate ITSP
provisioning of new phones remotely. ITSP can simply
include a default phone profile rule parameter in this
parameter so that the phone can obtain it from the SPA9000
on initial power-up. For example:
<Profile_Rule>https://www.itsp.com/init/spa$MA.cfg</
Profile_Rule>
Do not include <flat-profile>...</flat-profile>. The SPA9000
automatically adds them when serving the configuration file
to the phones.
Default: blank
If this option is yes, the SPA9000 uses the hostname
LVS_PROXY instead of its IP address in the Profile_Rule
parameter that is served to the phones when they request
init_$MA.xml during first-time initialization (when <Phone
Config XML> is not specified). On reboot, the phones resolve
the LVS_PROXY by querying the LAN via multicast. The
SPA9000 replies to the query with its actual IP address. This
allows the SPA9000 to use a dynamically-assigned IP
address that is not fixed.
Make sure that the phones have a compatible firmware that
understands that LVS_PROXY is a special hostname. For
SPA-941/942/921/922/901, use 4. 1 . 1 2 or later; for SPA-841,
use 3. 1 .6(KS) or later.
Enables or disables the Computer Telephone Interface
feature provided by some servers.
NOTE If you have a SPA962 with a SPA932 console, enable
CTI to support busy lamp field (B LF).
B
223