Cisco Small Business Pro SPA9000 Administration Manual page 67

Configuring Phone Lines and Calling Routing Behavior
Configuring Line Interfaces on the SPA9000
STEP 1
STEP 2
STEP 3
STEP 4
SPA9000 Voice System Administration Guide
Downloaded from www.Manualslib.com
Setting the Call Capacity Parameter
You can set the maximum total number of incoming and outgoing calls on each line
interface. The default value is unlimited. You can set a value from 1 to 15, or leave
the setting as unlimited.
The does not distinguish between incoming and outgoing calls for call
NOTE SPA9000
capacity.
Start Internet Explorer, and then enter the IP address of the SPA9000. Click Admin
Login and then click Advanced.
Click Voice tab > Line
Scroll down to the Subscriber Information section.
From the Call Capacity drop-down list, choose the maximum number of calls to
allow.
Click Submit All Changes.
manuals search engine
N
, where N represents the line interface number.
SPA9000 Voice > Line: Subscriber Information
4
65