Cisco Small Business Pro SPA9000 Administration Manual page 236

Small business pro voice system version 6.1
Table of Contents

Advertisement

SPA9000 Field Reference
Voice tab
SPA9000 Voice System Administration Guide
Downloaded from
www.Manualslib.com
Attn-Xfer Act Code
Modem Line Toggle
Code
FAX Line Toggle Code
Referral Services Codes
manuals search engine
If the code is specified, the user must enter it before dialing
the third party for a call transfer. Enter the code for a call
transfer.
Toggles the line to a modem.
Default: *99. Modem pass-through mode can be triggered
only by pre-dialing this code.
Toggles the line to a fax machine.
Default: #99
These codes tell the SPA9000 what to do when the user
places the current call on hold by hook flash and is listening
to the second dial tone.
One or more *codes can be configured into this parameter,
such as *98, or *97|*98|*123, etc. Max length is 79 chars. Each
*code (and the following valid target number according to
current dial plan) entered on the second dial-tone triggers the
SPA9000 to perform a blind transfer to a target number that
is prepended by the service *code.
For example, after the user dials *98, the SPA9000 plays a
special dial tone called the Prompt Tone while waiting for the
user the enter a target number (which is checked according
to dial plan as in normal dialing). When a complete number is
entered, the SPA9000 sends a blind REFER to the holding
party with the Refer-To target equals to *98<target_number>.
This feature allows the SPA9000 to hand off a call to an
application server to perform further processing, such as call
park.
The *codes should not conflict with any of the other vertical
service codes internally processed by the SPA9000. You can
empty the corresponding *code that you do not want to
SPA9000 to process.
Default: blank
B
234

Advertisement

Table of Contents
loading

This manual is also suitable for:

Spa9000

Table of Contents