Localizing The Spa400 Call Disconnect Tones - Cisco Small Business Pro SPA9000 Administration Manual

Localization

Localizing the SPA400 Call Disconnect Tones

STEP 4
Localizing the SPA400 Call Disconnect Tones
SPA9000 Voice System Administration Guide
Downloaded from www.Manualslib.com
e. If desired, make a backup copy of the existing sounds folder.
You are not overwriting any user message files in this procedure.
NOTE
However, it is a good practice to make a backup copy of your files
before doing any upgrades.
f. Move the new sounds folder into spa400vm\var\lib on the USB drive. When the
Confirm Folder Replace window appears, click Yes to All.
g. Remove the USB drive from the PC and insert it into the SPA400.
h. Power on the SPA400.
Place a test call to the voice mail system to confirm that the new language
prompts are used.
One important aspect of VoIP-PSTN integration is the Call Disconnect operation.
This operation allows the gateway to detect that the call has been terminated on
the other end, so the local line hangs up automatically. Detecting the tone cadence
of the Call Disconnect signal is a trigger for closing the loop.
Each country has its own Call Disconnect Signal tone which needs to be
configured on the SPA400
Tones," on page161.
Table 3 SPA400 Call Processing Tones
Country First Tone
On
(ms)
Australia 360
Denmark 430
France 490
manuals search engine
Tone
page. See Table 3, 'SPA400 Call Processing
2nd 3rd
(optional) (optional)
Off On Off On
(ms) (ms) (ms) (ms)
385 360 385
465 430 270
510
4th Repeat
(optional) Count
Off On Off
(ms) (ms) (ms)
5
1
1
8
161