Manual Client Configuration - Cisco Small Business Pro SPA9000 Administration Manual

Advanced Topics in SPA9000 Administration
Remote Provisioning Features
SPA9000 Voice System Administration Guide
Downloaded from www.Manualslib.com
Figure 5 Unprovisioned Client Station Acquiring a Configuration Profile
Request
/spa$PSN.cfg
To add a new IP phone to the SPA9000, connect the IP phone to the QoS switch to
which the SPA9000 is connected and power on the unit.
To add a previously-used IP phone to the SPA9000, perform the following steps:
1. Upgrade the IP phone with SPA9000-compatible firmware.
2. Factory reset the unit.
3. Power cycle the unit.
4. Connect the unit to the switch.
The SPA9000 provisions only the necessary parameters to the client stations. It
assumes the rest of the parameters have appropriate values, which are either the
default values or manually configured values. For example, the SPA9000
provisions only Extension 1 on the client stations. Access the administration web
server using the Administrator account to manually configure other extensions on
specific client stations.

Manual Client Configuration

The client stations can also be manually configured with the contents of the profile
served by the SPA9000.
The following XML file is served by the SPA9000 when a client station requests /
spa$PSN.cfg
manuals search engine
DHCP
Yes
Option 66?
Request
/cfg/init_$MA.xml
Request
/cfg/generic.xml
No
Look For
Config Server
A
185