Subscriber Information Section - Cisco Small Business Pro SPA9000 Administration Manual

SPA9000 Field Reference
Voice tab
SPA9000 Voice System Administration Guide
Downloaded from www.Manualslib.com
Refer Target Bye Delay
Referee Bye Delay
Refer-To Target Contact
Auth INVITE
Voice tab > Line page

Subscriber Information section

Display Name
User ID
Password
Use Auth ID
Auth ID
Call Capacity
Contact List
Cfwd No Ans Delay
manuals search engine
For the Refer Target Bye Delay, enter the appropriate period
of time in seconds.
Default: 0
For the Referee Bye Delay, enter the appropriate period of
time in seconds.
Default: 0
To contact the refer-to target, select yes. Otherwise, select
no.
Default: no
When enabled, authorization is required for initial incoming
INVITE requests from the SIP proxy.
Display name for caller ID.
User ID assigned by the ITSP, often the same as the DID.
Password for this User ID.
To use the authentication ID and password for SIP
authentication, select yes. Otherwise, select no to use the
user ID and password.
Default: no
Authentication ID for SIP authentication.
Maximum number of calls allowed on this line interface. You
can set a value from 1 to 15, or leave the setting as unlimited.
Note that the SPA9000 does not distinguish between
incoming and outgoing calls when talking about call capacity.
NOTE Unlimited = 16.
Default: unlimited
List of client stations that the SPA9000 alerts when there is
an incoming call to the line interface from the ITSP.
Delay, in seconds, before the call forwarding of no-answer
calls feature is triggered.
Default: 20
B
255