Fujitsu iScanner fi-6010N Operator's Manual page 480

Screen
System Status
Usage Status
444
Message
Cannot read data from a scanner unit.
Cannot read data from a scanner unit.
Action
Try the following:
• If the scanner does not restart
automatically, press the [Shut-
down] button on the "Login"
screen to turn the power off, and
turn the power back on again to
restart the scanner.
• If the error status persists after
the scanner is restarted, press the
[Shutdown] button on the
"Login" screen, disconnect the
AC cable from the scanner to
turn the power off, wait for at
least ten seconds, then reconnect
the AC cable and try turning the
power back on again. If the error
status persists, contact your
FUJITSU scanner dealer or an
authorized FUJITSU scanner
service provider.
Try the following:
• If the scanner does not restart
automatically, press the [Shut-
down] button on the "Login"
screen to turn the power off, and
turn the power back on again to
restart the scanner.
• If the error status persists after
the scanner is restarted, press the
[Shutdown] button on the
"Login" screen, disconnect the
AC cable from the scanner to
turn the power off, wait for at
least ten seconds, then reconnect
the AC cable and try turning the
power back on again. If the error
status persists, contact your
FUJITSU scanner dealer or an
authorized FUJITSU scanner
service provider.