Fujitsu iScanner fi-6010N Operator's Manual page 117

6. Select whether or not to enable roaming mode.
The default setting is [Off].
Select the [On] button to enable roaming mode. If roaming mode is enabled, a regular user
can login on different scanners while retaining their user data.
The following user data can be used in roaming mode.
•
"My List" e-Mail Address Books
•
Scan Settings
•
Name of the last network printer used
•
Name of the last network folder used
If the same network printer/folder is not set for each scanner, the name of the latest one used
is not shown.
Select the [Off] button to disable roaming mode.
7. Select whether or not to enable job mode.
The default setting is [Off].
Select the [On] button to enable job mode. If job mode is enabled, even if logging on via a
different scanner, the job buttons of regular users can be used. However, if the job modes on
the Central Admin Server have not been released, the job modes set with the Admin Tool are
used.
Select the [Off] button to disable job mode.
8. Press the [OK] button.
⇒
The Central Admin Server settings are set.
⇒
The scanner information is transmitted to the Central Admin Server.
If the process is successful, the text will change to "This scanner's server-side status is:
Registered".
•
For details about the settings required to use SSL for communication between
HINT
the Central Admin Server and scanner, refer to
work" (page
•
When user roaming or job settings enabled, if communication with the Central
Admin server is not possible a confirmation message will appear at login.
If [OK] is selected, the settings information saved in the scanner are used.
Selecting the [Cancel] button returns to the login screen.
4.7 Using the Network Settings Menus
78).
fi-6010N Network Scanner Operator's Guide
"4.7.2 Setting the Admin Net-
4
81