Fujitsu iScanner fi-6010N Operator's Manual page 85

1. From the [Start] menu, point to [All Programs]-[fi-scanner V2.1], and then select
[fi Network Scanner Admin Tool].
⇒
The Admin Tool is started.
2. Specify the "Connect to" (of the scanner).
Enter the IP address, scanner name, or FQDN for the scanner to be setup or managed.
•
ATTENTION
•
•
•
3. Press the [Connect] button.
⇒
The login screen appears.
4.5 iScanner Administrator Login: via the Admin Tool
If the port number was changed in
(page 78), enter the port number changed for Port Number.
When trying to connect with a port number other than the specified
number, it will take up to 20 seconds before a connection error occurs.
To use SSL, select the [Use HTTPS] checkbox.
If the Admin Tool is started while there is insufficient free memory, a
script error may occur. Try again after ensuring that there is enough
free memory.
fi-6010N Network Scanner Operator's Guide
"4.7.2 Setting the Admin Network"
4
49