Fujitsu iScanner fi-6010N Operator's Manual page 472

Screen
Scanner Name
Date/Time
Login Settings
Admin Pass-
word
436
Message
Scanner name contains invalid charac-
ters.
Workgroup or domain name contains
invalid characters.
Domain login failed.
Specified domain cannot be found.
Workgroup or domain name has not
been entered.
Date/time setting is invalid.
Time adjustment has caused the ses-
sion to timeout. Logging out now.
Invalid user name.
User name contains invalid characters.
New password contains invalid char-
acters.
Action
Re-enter the scanner name using
only specified valid characters.
Do not enter a blank space before
or after the scanner name. Do not
use control characters or any of the
following symbols:
" / \ [ ] : | < > + = ; , ?
Workgroup or domain name con-
tains invalid characters.
Workgroup names may be up to 15
alphanumeric characters long.
Domain names may be up to 255
alphanumeric characters long, and
".-_" can also be used.
Check the specified user name and
password.
Could not connect to domain.
Check that the specified domain is
correct, and that it is connected to
the network.
Group or domain name contains
invalid characters.
Group names may be up to 15
alphanumeric characters long.
Domain names may be up to 255
alphanumeric characters long, and
".-_" can also be used.
Re-enter the date/time using only
valid numbers.
No action required.
Enter a valid user name, and try
again.
Re-enter the user name using only
specified valid characters.
Enter a valid new password.
Alphanumeric characters (case
sensitive) and symbols may be
entered.