Fujitsu iScanner fi-6010N Operator's Manual page 537

Code
12040100 Error: network folder access
was refused.
F4B30000 An error has occurred. Try turn-
ing the power off and back on
F4CA0000
again. The administrator should
F4EF0000
contact the FUJITSU scanner
dealer or an authorized
F2010002
FUJITSU scanner service pro-
F2020002
vider for help.
F2040002 [alphanumeric eight digits]
Message
Try the following:
• Contact a network administrator to
• For the MTIFF format, the file size for
• Check that the file name format and
For saving to the FTP server network
folder, try the following:
• Check that the LAN cable is connected
• Contact a network administrator to
• Contact a system administrator to check
• Ensure the free space requirements are
• Close unneeded network connections,
Shutdown and press the startup button to
restart the scanner.
If the error status persists, contact your
FUJITSU scanner dealer or an authorized
FUJITSU scanner service provider.
fi-6010N Network Scanner Operator's Guide
Action
check whether the network folder is
ready for use.
the scanned data may not exceed 2GB.
Try adjusting the scan parameters to
decrease the size of the file.
number of characters of the file name
are allowed for the file server.
properly to the scanner and FTP server.
check that the FTP server is working
properly.
that the scanner IP address setting and
FTP server network folder path are cor-
rect.
"8.3 Network Connection Troubleshoot-
ing" (page 388)
met, and try again.
and try specifying the network path
again.
E
501