Fujitsu iScanner fi-6010N Operator's Manual page 482

Screen
System Set-
tings File
System
Updates
Common
446
Message
Specified backup file could not be
found or could not be uploaded.
Backup data could not be restored.
Specified file contains unsupported
data.
Backup data could not be restored.
The language of the backup file must
be the same as the current language
setting.
System settings were successfully
restored.
The scanner will be restarted.
Specified update file cannot be applied
to this system.
Specified update file could not be
uploaded, or is not a valid system
update.
Error: problem with XXXXXX.
Contact your FUJITSU scanner dealer
or an authorized FUJITSU scanner
service provider.
Error code=xxxxxxx
Result code=xxxxxxx
(XXXXXX: Function Name)
Error: problem with XXXXXX.
Contact your FUJITSU scanner dealer
or an authorized FUJITSU scanner
service provider.
(XXXXXX: Function Name)
Action
Try the following:
• Check if the specified backup
file is correct.
• Try restoring the file again.
• Specified backup file may not
be uploaded because of network
error. Check the network status.
Versions do not match between the
backup device and restoring
device.
Update the restoring device.
"4.10.3 Updating the Scanner's Sys-
tem Software" (page 153)
Change the language setting back
to the language at the time of
backup, and try restoring the
backup data again.
No action required.
Check the applicable system for
the update file.
Try the following:
• Check if the specified update
file is correct, and try again.
• Specified update file may not be
uploaded because of network
error. Check the network status.
Contact your FUJITSU scanner
dealer or an authorized FUJITSU
scanner service provider.
Contact your FUJITSU scanner
dealer or an authorized FUJITSU
scanner service provider.