Scanner Registration; Network Connection - Fujitsu iScanner fi-6010N Operator's Manual

■ Scanner Registration

Sets whether to reject registration of a scanner whose configuration information is not set.
• Automatically add new scanners to the Central Admin configuration when they are discovered.
Select the checkbox to add a new scanner automatically.
If the checkbox is selected, scanner configuration can automatically be added to the Central
Admin Server.
Scanner configuration information can be set from the "Scanner List & Config" window dis-
played by selecting the [Scanner List & Config] button in the Central Admin Console main
window.

■ Network Connection

Sets up the network to communicate with scanners and the Central Admin Console.
• Use HTTPS to communicate with the Central Admin Console
Select this checkbox to use HTTPS for Central Admin Console communication.
• Central Admin Console Port Number
Enter the port number used to communicate with the Central Admin Console.
The default is "10444". The value can be specified within the range of 1 to 65535.
• Use HTTPS to communicate with scanners
Select the checkbox to use HTTPS to communicate with scanners. If this checkbox setting is
changed, the "SSL" setting on the "Admin Network" screen from the "Network Settings" tab
screen must also be changed for all managed scanners.
• Scanner Communication Port Number
Enter the port number used to communicate with scanners using http/https.
The default is "20444". The value can be specified within the range of 1 to 65535.
• Maximum Connections
Select the maximum number of scanners that can be connected simultaneously to the Central
Admin Server.
The default is "10".
• Wake-On-LAN
Configures the Wake-On-LAN settings to start the scanner to be controlled from the Central
Admin Server.
• Port Number
Enter the port number to be used to send magic packet for Wake-On-LAN.
The default is "443". The value can be specified within the range of 1 to 65535.
• # Tries
Select the number of times magic packet is sent for Wake-On-LAN.
The default is "3".
• Interval
Select the interval for sending magic packet for Wake-On-LAN.
The default is "1" sec.
218