Setting The Job Mode; Registered Job Mode Settings - Fujitsu iScanner fi-6010N Operator's Manual

5.10 Setting the Job Mode

The job mode can be set by registering a new job mode and setting a release schedule.
The job mode can be set from the "Job Mode Settings" window.
The "Job Mode Settings" window is displayed by selecting the [Job Mode Settings] link in the
Central Admin Console main window.

■ Registered Job Mode Settings

• Current Release
Shows the upload date and the release date of the current job mode settings.
Selecting the [Cancel] button cancels release of the job mode settings.
• Scheduled Release
Shows the next scheduled upload date and the release date of the job mode settings.
Selecting the [Cancel] button cancels release schedule of the job mode settings.
Even if available job mode settings are canceled, job mode settings already sent to a scanner
will not become invalid. To not use job mode settings in a scanner, on the [Network Set-
tings], "Central Admin Server" screen, set "Job Mode" to "Off".
236