Scanner Configuration File Format; Scanner Configuration File Format (For Importing) - Fujitsu iScanner fi-6010N Operator's Manual

B.2 Scanner Configuration File Format
The scanner configuration file format requirements differ for the following two cases.
• For importing
• For exporting
B.2.1 Scanner Configuration File Format (for Importing)
This section describes the scanner configuration file format requirements for importing.
• The file charset should be the same as the value on the Central Admin Console, "Central
Admin Server Settings" screen. The default charset is UNICODE (UTF-8).
• The file is in CSV format. The values for each item are as follows.
Mac Address
IP Address
Subnet Mask
Scanner Name
Port Number
Use HTTPS?
Model
Settings Group
Add-in Group
Comment
System Updates
(*1):
Item
XX:XX:XX:XX:XX
(X is an alphanumeric character)
xxx.xxx.xxx.xxx
(xxx is a value from 0 to 255)
xxx.xxx.xxx.xxx
(xxx is a value from 0 to 255)
Up to 15 alphanumeric characters long
(hyphens may also be used)
Numerical value from 1 to 65535
0: Do not use HTTPS (default)
1: Use HTTPS
Up to 64 characters long
Up to 32 characters long (*1)
Up to 32 arbitrary characters long (*1)
Up to 256 characters long
0: Enable (default)
1: Disable
The following character strings cannot be used:
(Default) (All) __default__ __all__
"__" is two underbars entered one after another.
Value and Format
fi-6010N Network Scanner Operator's Guide
B
Remarks
Optional
Optional
Optional
Required
Optional
Optional
Optional
Optional
Optional
Optional
Optional
421